Starting P3D

<< Click to Display Table of Contents >>

Navigation:  PMOD 3D Rendering Tool Introduction >

Starting P3D

The P3D tool is started from the PMOD ToolBox by clicking the dedicated button, or by dragging image files onto the button.

picture_3135

An automatic Acceptance test is taking place when P3D is started for the first time. Several 3D scenes are presented for visual inspection and a dialog window opens for each scene. Please confirm whether the expected output is shown on the screen or not.

The following tests are performed:

1.Test of texture 3D support.

2.Test of maximum resolution of Volume rendering (512x512x512).

3.Test of a full 3D scene loaded from protocol.

4.Test of a scene capture.

At the end of all steps the test results will be summarized in a message window. If the test succeeded the results should be similar like the one below:

Acceptance Test Results