Methodology Description

<< Click to Display Table of Contents >>

Navigation:  Partial-Volume Correction (PVC) > PVC based on Manual and Brain Template VOIs >

Methodology Description

VOI based Partial-Volume Correction (GTM Method)

The GTM method according to Rousset [2] restricts the partial volume correction to the signal of the true objects which are constituted by VOIs. The relation of measured PET values (affected by the partial-volume effect) to the true PET values is given by the matrix equation below

picture_5043

with the following notations:

Ctrue

Vector of the true average activity concentration in the different VOIs of interest. The vector length n equals the number of object VOIs.

Cmeasured

Actually measured average activity concentration in the different VOIs.

GTM

Geometric Transfer Matrix which describes the spill-over among all the VOIs. The matrix is square with nxn weighting elements wi,j which express the fraction of true activity spilled over from VOIi into VOIj.

In practice, wi,j is calculated as follows: A binary map is created with 1 in all pixels of VOIi and 0 elsewhere. The map is convolved with the imaging Point-Spread Function (PSF), and in the resulting spillover map the average of all VOIj pixels calculated.

The GTM equation above represents a system of linear equations. Once the weights have been calculated, the system can be solved for the true values Ctrue by matrix inversion. Rousset [2] has shown that this algorithm is robust to noise propagation during the correction process.

Region-based Voxel-wise (RBV)

The RBV correction introduced by Thomas et al [6] extends the GTM method and performs a voxel-wise correction of the entire image.

In a first step the standard GTM correction is performed, resulting in a synthetic image CGTM, which consist of the VOIs filled with the corrected average values.  

In a second step a corrected image is calculated, which is not any more homogeneous within the VOIs, and which shows an image of the entire brain, not just the GM pixels. The calculation uses the formula

picture_8894

whereby the measured PET image CMeasured is multiplied by a correction term calculated from the GTM corrected image and the point-spread function.

The method applied for the PVC calculation is available for selection on the bottom of the PVC interface:

PVC_VOIMethodSelection