In some situation it is not necessary to step-wise run through the matching. For instance, if a similar matching task is repeated and it doesn't require any interactive adjustments, the data can simply be selected and the processing started.
The automatic approach requires that the images reside in the database. They have to be brought to the Selected for loading area, and then the matching can be started with the button in the lateral taskbar as illustrated below.
Please note that the push-pin button for the loading need to be set to "overwrite mode" as indicate din the capture above by the red rectangles.
The applied registration depends on default matching method specified in the configuration.
With Selected the most recently applied registration is used with all its parameter settings, whereas for the other choices the default species-dependent parameters will be applied.